With developing, My company designed more and more new 316 LED underwater/Fountian Lights. We open more than 20sets of 316SS lights' mold in last four years. From we signed Agent for Canada and USA market on 2013. On last month of 2016, we signed new agent in Israel. They will only promote and sell our 316SS led underwater/fountain light in their agent market. We wishes our products will get big sucessful in Israel, Like we do in North America market with our agent !

1. What you should have to prepare: 1. RGB DMX control LED lights (constant Voltage decoder inside) For example: The led underground lights RS-UG3W-PM MADE BY SHENZHEN RISE OPTOELECTRONICS 2. The matched DMX address Editor. (DC12V) For Example: the RS-DAE-02 MADE BY SHENZHEN RISE OPTOELECTRONICS 3. One Power transformer For Example: Mean well one 60W transfer the AC220V to DC12 for the light and the Editor. 4. One multifunction DMX controller with individual control function. 2. How to Edit the address to the lights: Please check the operation guide of the DMX address Editor below. 3. When you tested the address of the lights are editted well. Then connect all the lights to the controller to check if the controller can control all the lights individually. Warm prompt： 1. If you are not very professional, and you are prepare to get the lights be individual controlled. You’d better ask the professional lights supplier to prepare all the material for you. Like the controller, the Driver(Decoder),the lights. Make all these in one system and tested well for you. Then when you get them, you just need to test it again and install them based on the wiring diagram. 2. If you have the lights and they have Constant Voltage decoder inside. And you are professional on the lights refitting First, ask your light supplier to provide you a DMX address Editer Second, Find one DMX controller suitable to the lights (with Constant Voltage decoder inside) and you are satisfied with its individual control function. Third, Edit the lights and connect to the DMX controller to test. And then you got it. (Most controller suppluer will tell you their controller must use their driver to provide the stable and reliable function, so this is not a good idea. You may want to take of the inside driver and replace it with the outside driver, Howeverthe lights and the PCS are made based on the driver. They are in one light ,and they are design together. If you change the drive, the light and the PCB maybe not suitable) It is hard to get one balance between the Driver&Controller supplier and the lights supplier. Nobody can make sure they will be perfect in the cooperation。 3. If you are not professional and you have got the RS-UG3W-PM with DMX Constant Voltage decoder inside. Two ways for you. (1) Edit the lights and get one individual control function DMX controller which suitable to our Constant Voltage Decoder. The DMX control is the popular control model in the world. Our engineer told me there is no need to take of our driver and you can use our driver for the DMX controller if their signal are the same.The Letch’s officer seems mislead you. Please send us the specification of the DMX controller you want to use, then we can check for you to know whether it suitable to our lights or not. (2) Replace the PCBA in the lights with the PCBA which made based on the DMX driver and the DMX controller you want. In this way, you must tell us the specification of the lights controller ...

Many people used 3W/6W/9W led inground light for decoration, but different from them, our Germany customer as a unique ideal for 36W led inground light, this application is very special , very beautiful.

Our company has held a birthday party for three of our collegues. We have sung and eaten birthday cate together.They also shared their wishes.(They looks so happy,I am also happy...) And then,they were happy to draw a lottery or raffle.(I want to have a try,but I am afraid of punishment...) Unfortunately,only this girl won the prize. (I am so jealousy,I want it....) We are happy to work,happy to play,happy to contribute to our family-Rise.

Dear All, RISE has been in outdoor landscape lighting industry for many years, and we have got many feedback and suggestion from our lovely customers, that's whay RISE geting better day by day. Today we would like to share some wonderful pictures . Egypt: Thailand: Mexico: CA＆USA: All in WWW.RISELED.COM :)

Different landscape lights for different application. As for small size 1-3W led inground lights, it’s usually for deck use, or paver use. 6-12W underground light for path or public square use. But for palm tree, you should use a big enough power led lights, 24-36W would be the best, as a palm tree is around 7-10meters, nowadays more and more hotels are growing palm trees, and in the night time, they should be with lights, which makes the hotel great. Here below is the application of led underground light for palm trees in THE DESERT ROSE hotel in Hurghada city, Egypt.